| View previous topic :: View next topic |
| Author |
Message |
Brian_Fenner
Joined: 24 Aug 2004
Posts: 64
|
 Posted: Sun May 15, 2005 7:40 pm Post subject: Course Timer (Used as Trip Timer) Problem |
 |
|
I just used the Course timer today (used as a trip timer)..........
http://www.veypor.com/forum/viewtopic.php?p=972&highlight=#972
and discovered a problem after 3 hours of use............the average MPH display is incorrect after 3 hours (looks like the average MPH calculation continues to use 3:00:00 anytime after the three hour time has passed).
See the pictures below that show the wrong average MPH calculation based on time and accumulated miles..............
(Pretty tough having an average velocity higher than the MAX velocity) 
BTW - This setup (allowing Veypor powered on all the time while using the course timer) works great as a day-long trip timer.........this is exactly the setup I was looking for!
Once you guys get the calculation problem corrected this will be awesome for us touring riders!
Thanks......
_________________
Brian Fenner
White Bear Lake, Minnesota |
|
| Back to top |
|
 |
NLEForum
Site Admin
Joined: 27 Apr 2004
Posts: 1168
|
| Posted: Mon May 16, 2005 12:06 am Post subject: |
|
|
You are right. We were maxing out at 3 hours. This limit is now removed and an improved firmware (with some other fixes) is on the site.
Nathan |
|
| Back to top |
|
|
Brian_Fenner
Joined: 24 Aug 2004
Posts: 64
|
| Posted: Mon May 16, 2005 1:24 am Post subject: |
|
|
| NLEForum wrote: | You are right. We were maxing out at 3 hours. This limit is now removed and an improved firmware (with some other fixes) is on the site.
Nathan |
| Quote: | Veypor Firmware Download v2.02 - New May 15, 2005
- Removed leading 0's from driving mode displays. (Shows 0.0kph not 000.0kph)
- Fixed problem with auto starting of 1/4 Mile Runs.
- Fixed accuracy of course timer average velocity for trips of over 3 hours. |
Dang.........you guys are absolutely awesome!
It sure is nice to buy a product and get great support for it............although I didn't expect a fix in just a few hours! 
Thank You very much!
_________________
Brian Fenner
White Bear Lake, Minnesota |
|
| Back to top |
|
|
Brian_Fenner
Joined: 24 Aug 2004
Posts: 64
|
| Posted: Sun May 22, 2005 7:29 pm Post subject: |
|
|
FYI..........
Just got in a long ride today and the course timer now works great. Also, the leading zero removal is a great improvement as it clears up the display and is alot easier to read IMHO.
Thanks guys..........
_________________
Brian Fenner
White Bear Lake, Minnesota |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
