| View previous topic :: View next topic |
| Author |
Message |
tritiumracing
Joined: 12 Aug 2004
Posts: 1
|
 Posted: Thu Aug 12, 2004 8:26 pm Post subject: Aprilia RS250 |
 |
|
I will be installing the Veypor unit on my Aprilia challenge RS250 racebike shortly. The bike already has a digigear indicator, lap timer and computerized electronics package installed, so as soon as the Veypor unit arrives I will probably need a bit of help getting it spliced into the ignition coils.
Hopefully, this will be an easy process, but if not I hope I can count on this board. Cheers.
_________________
CCS #66
ACU #83 |
|
| Back to top |
|
 |
NLEForum
Site Admin
Joined: 27 Apr 2004
Posts: 1168
|
| Posted: Wed Aug 18, 2004 8:42 pm Post subject: Aprilia |
|
|
You should have no problems installing it on your Aprilia. The ignition coil is easy to find and splice to. Follow your spark plug wire back to the coil (newer coils sit directly on the spark plugs). Driving the coil should be two wires coming from your ECU. One of these wires (usually red or yellow) is the wire you need to splice the Veypor into.
Nathan |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
